date
Language
 
17.08.2015

Product Portrait

Compressors for trucks and buses

M1Akle3d2cc

Guaranteed quality has made the brand DT Spare Parts the leading brand in the international Independent Aftermarket for commercial vehicles. The complete range includes all required spare parts for trucks, trailers and buses, including all standard compressors.

The DT brand products, made of high quality materials, meet your highest quality requirements and guarantee a long period of use.

Compressed air is the basic energy for all pneumatic brake systems, as well as air suspension systems in commercial vehicles. A compressor provides this compressed air in sufficient quantities and at the necessary pressure.

The compressor is driven directly by the vehicle engine. It is similar in construction to a vehicle engine. Inside the compressor are, depending on the power requirements, one or two pistons, which in the downwards movement, suck in filtered air from outside through an open suction lamella.

DT-Technic Info

By the upwards movement the suction lamella closed and the sucked-in air is compressed, a pressure lamella opens. The compressed air is fed to the air reservoir via an air dryer including an oil separator and made available to the “consumers”.

Modern compressors possess an idling facility which makes it possible to reduce the power requirements of the compressor in the case of unnecessary air feed. In modern constructions, the compressor can be completely separated from the drive by means of a clutch and so consumes no more energy. This has a positive effect on the fuel consumption of the vehicle.

As the compressed air becomes very hot, newer high-Performance compressors have a water cooling system, which effectively cools the thermally highly-stressed cylinder head.

 Construction of compressors

  1. Suction lamella
  2. Pressure lamella
  3. Control lamella idling device
  4. Control piston idling device
  5. Cooling channel (water cooling)
  6. Hardened surface
  7. Aluminium (con) rod
  8. Manufacturer’s marking


In order to satisfy the high demands, the individual components also meet the demands placed upon them, such as forged crankshafts, induction-hardened slide bearing surfaces, con rods made of highstrength aluminum, as well as valve lamellas made of particularly elastic spring steel.

In addition to complete compressors, DT Spare Parts offers all standard spare parts and repair kits for compressors.

New Products

2.16147 | Accelerator pedal
4.62701 | Belt tensioner
6.43006 | Clutch servo
2.16239 | Sensor, accelerator pedal
2.44136 | Relief valve
4.62804 | Clutch cover, with release bearing
1.18293 | Solenoid valve, ABS
12.77027 | Compressor, air conditioning, oil filled
6.24000 | Oil pump
5.42153 | Fuel pump, for servo pump
 
 

New Catalogues

image
image
image
image
image

Product Portraits

image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image