date
Language
 
16.06.2015

Product Portrait

Disc brake pads for trucks, trailers and buses

ocHMjAvdouQ

Guaranteed quality has made the brand DT Spare Parts the leading brand in the international Independent Aftermarket for commercial vehicles. The complete range includes all required spare parts for trucks, trailers and buses, including all standard disc brake pads.

The DT brand products, made of high quality materials, meet your highest quality requirements and guarantee a long period of use.

Disc brake pads must represent an optimum friction partner for the brake discs, and meet the highest demands, even in dusty or wet environments. Disc brake pads have to withstand temperatures of up to +800 °C with blazing hot brake discs and always be ready to function. They are among the most highly stressed parts which are subject to wear.

DT-Technic Info

Only high-quality materials made of metals, fibers, fillers, lubricants and organic ingredients are used in production. The properties of disc brake pads of the brand DT Spare Parts are perfectly coordinated with the characteristics of the brake discs of the same brand. This results in the best possible friction combination.

Disc brake pads of the brand DT Spare Parts have been tested by the “TÜV Nord” for performance and degree of wear, and have completed an elaborate test procedure with good results. They also comply with the guidelines of the ECE-R90 Standard.

Disc brake pads should always be replaced axle-wise at the same time. When replacing brake discs, the disc brake pads must also be replaced. After fitting new brake components, a certain running-in period is required before the full braking effect is achieved.

In addition to disc brake pads, the complete range of the brand DT Spare Parts also contains all standard accessory kits and brake discs.


 Construction of disc brake pads

  1. Permanent marking as per guideline ECE-R90
  2. Bedding in layer/ layer for running-in period of brake disc surface
  3. Friction material
  4. Friction underlayer
  5. Welded steel mesh
  6. Metal backing plate

 

New Products

2.44136 | Relief valve
7.74026 | Condenser, air conditioning
4.62804 | Clutch cover, with release bearing
2.16239 | Sensor, accelerator pedal
4.62701 | Belt tensioner
12.77027 | Compressor, air conditioning, oil filled
5.42153 | Fuel pump, for servo pump
4.61476 | Expansion tank
6.24000 | Oil pump
2.16147 | Accelerator pedal
 
 

New Catalogues

image
image
image
image
image

Product Portraits

image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image