date
Language
 
15.04.2015

Product Portrait

Oil pumps for trucks and buses

kztWAv_wKRA

Guaranteed quality has made the brand DT Spare Parts the leading brand in the international Independent Aftermarket for commercial vehicles. The complete range includes all required spare parts for trucks, trailers and buses, including all standard oil pumps.

The DT brand products, made of high quality materials, meet your highest quality requirements and guarantee a long period of use.

The oil pump is an essential part of the engine lubrication system. The main purpose of engine lubrication is to reduce friction between gliding components, which results in a reduction in wear. Oil is sucked by the oil pump from the sump, pumped through filter and cooler, and finally conveyed through pipes and channels to the lubrication points.

DT-Technic Info

Oil pumps are usually driven by the timing gears of the engine. In commonly installed gear pumps, a pair of gears conveys the oil over the outer tooth spaces, along the wall of the housing from the suction to the discharge side.

Precisely coordinated axial distances of the gears, with high surface quality, as well as narrow clearances, ensure the provision of the required quantity of oil or oil pressure at all times. The tooth profile is measured using a gear-measuring machine; thus guaranteeing exact running properties. The toothing is additionally hardened, so that wear remains at a minimum. Oil pumps of the brand DT Spare Parts are 100 % tested for their performance. The supplied installation instructions is to be observed.

Before installing a new oil pump, the lubricating and drive systems of the engine must be cleaned and may not show any signs of damage. The oil filter is also to be changed. Before operation of the pump, the gears of the new oil pump should be wetted with clean engine oil. Any leaks or unusual noises after installing the oil pump may indicate further defects in the engine.

Construction of oil pumps

  1. Housing
  2. Fixing screws
  3. Drive wheel
  4. Gear
  5. Drive shaft

In addition to oil pumps, DT Spare Parts also offers all standard oil sumps, oil coolers, oil pressure valves and oil filters.

New Products

2.16239 | Sensor, accelerator pedal
6.24000 | Oil pump
5.42153 | Fuel pump, for servo pump
7.74026 | Condenser, air conditioning
4.62701 | Belt tensioner
6.43006 | Clutch servo
4.61476 | Expansion tank
2.44136 | Relief valve
4.62804 | Clutch cover, with release bearing
12.77027 | Compressor, air conditioning, oil filled
 
 

New Catalogues

image
image
image
image
image

Product Portraits

image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image