Gas Springs for trucks and buses
The DT Spare Parts brand offers a complete range with more than 30 000 different spare parts for trucks, trailers and buses, including all standard gas springs.
DT-Technic InfoDT Spare Parts brand engine valves are exposed to very high Gas springs are used in all applications where light and safe movement, a defined sequence of motions or a supporting lifting movement is required. In order to achieve optimum lubrication of the guide and sealing system, the gas springs should be installed with a piston rod pointing downwards in a non-operational state, unless they are intended for installation independent of a position.
The gas springs should be protected against tilting, bending forces or lateral forces in order to avoid a negative effect on the service life.
|DT Spare Parts recommends the environmentally-friendly disposal of gas springs. They should be drilled out in order to drain off the compressed nitrogen and the oil contained.|
DT Spare Parts brand gas springs are distinguished by the following characteristics
· Due to the coated surface of the piston rod, a longer service life and better corrosion resistance are achieved.
· The sealing package between the sleeve and piston rod, which guarantees maintenance of the gas pressure, is designed as a double package.
· Designed for 100,000 load changes and more.
· All connection elements and constructions correspond with the reference parts of the vehicle manufacturer.