Frankfurt am Main / Germany
Wessels + Müller
Dortmund / Germany
Munich / Germany
Hanover / Germany
The camshaft opens and closes the engine’s intake and exhaust valves at the right time. This is achieved via an exact stroke and a precisely defined sequence.
Tips & Tricks
If the camshaft is replaced, the bearings must also be replaced and the attached components checked. They must also be checked for proper functioning after a camshaft adjustment. It is also essential to check the oil supply to the lubrication points.
During the subsequent assembly, the correct valve play, the correct assembly torques, as well as the tightening sequence and alignment with the crankshaft must be adhered to (as per the vehicle manufacturer’s instructions) in order to prevent incorrect loading and thus early failure of the camshaft. The camshaft may also need to be adjusted according to the respective vehicle type. For all assembly work, the tool/special tool specified by the vehicle manufacturer must be used.
Construction of the camshaft
Further articles from the product range of the brand DT Spare Parts
|Camshaft||Camshaft||Camshaft||Camshaft bearing kit|
|replaces||1509917||51.04400.6006||457 050 1301||20999613 S|