date
Language
 

访问我们

Automechanika Frankfurt
Frankfurt am Main / Germany
11.09.-15.09.2018

 

Wessels + Müller
Workshop fairs

Berlin / Germany
25.-27.05.2018
Hall 21, Stand 21a07

Dortmund / Germany
31.08.-02.09.2018

Munich / Germany
12.-14.10.2018

 

PV Live!
Hanover / Germany
01.09.-02.09.2018

 

km/h Festival
Sarstedt / Germany
02.06.-03.06.2018
Hall 3, Stand I-305

Headquarter extension

通讯

+86 21 5298 7126

Find us on:

02.05.2018

Product Portrait

1.19136 Servo pump

The 1.19136 power steering pump generates the hydraulic oil required for easy steering of the vehicle and supplies it to the steering gear.

A blowhole-free aluminium housing manufactured by the high-pressure process contains a rotor with rotor blades manufactured to the highest precision, with the best possible surface roughness and extreme hardening, in order to withstand even the most extreme operating conditions in winter due to temperature fluctuations and salt. A durable, oil-tight pump is guaranteed by the use of a high-quality shaft seal ring. Each pump is individually checked for the manufacturer‘s specifications during production.


Tips & Tricks

The equipment must be checked before the article is replaced. If a high water content or dirt particles are detected, the equipment must be replaced. In case of heavy soiling, the hydraulic system should be rinsed as described in the assembly instructions supplied with the article. The mounting surface must be cleaned. If sealant is used during assembly, it is important that no sealant enters the operating fluid circuit.

The erection screws must be mounted with the torque specified by the manufacturer. The connections should be installed by hand to prevent damage to the thread. Now ventilate the system: The steering wheel must be turned three times to the left and three times to the right when the front axle is raised. During the subsequent test run, the leakage check must be carried out and the level of the equipment must be corrected.

Product link: 1.19136

Structure of the servo pump

  1. Ball bearing
  2. Drive shaft
  3. Shaft sealing ring
  4. Thrust washers
  5. Rotor
  6. Rotor blades
  7. Aluminium housing
  8. Control valve


Further articles from the product range of the brand DT Spare Parts

Servo pumpServo pump Repair kit, servo pumpSteering gear
Art.No. 4.62162 6.26407 1.319544.65358
replaces LuK: 542 0048 10 50 10 239 659 1118098, 276140940 460 3300

 Product Portrait eBook

备忘录

新 产品

2.94559 | Repair kit, EBS valve
12.80082 | Door lock, front, left
4.67850SP | Steering gear, without ball joints
7.54711 | Belt tensioner
4.64852 | Cabin lock
4.68172 | Thermostat
5.70262 | Solenoid valve, ECAS
3.25550 | Exhaust brake, with throttle
2.30053 | Clutch servo
6.30090 | Fan retainer
 
 

新目录

image
image
image
image
image

Product Portraits

image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image
image